Freshwater Aquarium Parts and Accessories
Adapters, guards, spray bars, and snail traps, sized for planted tanks, community tanks, and betta tanks.
18 parts made for freshwater tanks.
Freshwater tanks need parts that fit real filters and real hoses. Below are adapters, guards, spray bars, and more, sized for planted and community setups. Pick a category to see every size we make.
Adapters
Connect a canister hose to vinyl tubing or another hose size. Push-on fit, no glue.
Elbow Adapters
Two piece, 90 degree adapters for tight spots behind the tank.
Shrimp Guards
Slotted intake cages with a 1.5mm slot, for shrimp, fry, and small livestock.
Fish Guards
Wide-slot intake cages for fish tanks, a 4.0mm slot, wider than our shrimp guards.
Snail Traps
Baited cups with a funnel entry, in a 9mm or 14mm opening. Set one on the substrate and lift the lid to empty it.
Breeder Boxes
Open top boxes with slotted walls and a slotted floor that hold small fish apart from the tank. Hang one over the rim or mount it on your own suction cups.
Feeding Rings and Nori Clips
Rings that wall off a patch of the water surface for food, plus clips that hold a sheet of dried algae. Magnet pocket or rim clip.
Duckweed Scoops and Rakes
Long handled trays and combs for floating plants. Two pieces that slide together by hand, about 10 inches once assembled.
Spray Bars
Perforated return bars with even hole spacing, sized to your canister hose.
Lily Pipes
Rim-hook inflow and outflow pipes. A PETG alternative to glass.
Lily Pipe Holders
Rim clips that grip a 13mm or 17mm lily pipe and clamp to the tank wall.
Heater Guards
Slotted cages that close around a round heater body. Built in segments, so you set the length.
Power Filter Media Baskets
Refillable open baskets for hang on back power filters. Fill them yourself and stop rebuying cartridges. Compatible with AquaClear, Seachem Tidal, and Marineland Penguin filters.
Surface Skimmers
Weir boxes that pull the film off your water surface, designed to fit a hang on back filter intake.
Probe and Equipment Mounts
Printed clips and brackets that hold a probe, a controller, or a heater where you want it. Keyed to a 12mm probe and to named gear.
UV Sterilizer Mounts
Two piece PETG clamps that hold an inline UV sterilizer against the cabinet.
Light Shades
Printed skirts that block glare and stop light spilling into the room, shaped to popular reef LED fixtures.
Sump Baffle Clips
U channels that silicone into a sump and hold a baffle panel square. Cut for 1/4 inch and 3/8 inch panels, with a corner version too.
Not sure which part fits your freshwater tank?
Tell us what you have on one end and what you want on the other. We will show you the part built for those two sizes.
Find your fit