Aquarium Hose Adapters
Connect a canister hose to vinyl tubing or another hose size. Push-on fit, no glue.
Pick the one that matches your hose or pipe, or choose your filter model and we will pick it for you. Need a 90 degree bend instead? See our elbow adapters.
Filter by size
Showing all 19 parts.
Eheim 9/12mm to 1/2 Inch Vinyl Barb Adapter
9/12mm hose to 1/2 inch vinyl
Eheim 12/16mm to 1/2 Inch Vinyl Barb Adapter
12/16mm hose to 1/2 inch vinyl
Eheim 12/16mm to 5/8 Inch Vinyl Barb Adapter
12/16mm hose to 5/8 inch vinyl
Eheim 12/16mm to 3/4 Inch Vinyl Barb Adapter
12/16mm hose to 3/4 inch vinyl
Eheim 12/16mm to 1 Inch Vinyl Barb Adapter
12/16mm hose to 1 inch vinyl
Eheim 16/22mm to 5/8 Inch Vinyl Barb Adapter
16/22mm hose to 5/8 inch vinyl
Eheim 16/22mm to 3/4 Inch Vinyl Barb Adapter
16/22mm hose to 3/4 inch vinyl
Eheim 16/22mm to 1 Inch Vinyl Barb Adapter
16/22mm hose to 1 inch vinyl
Eheim 25/34mm to 1 Inch Vinyl Barb Adapter
25/34mm hose to 1 inch vinyl
Eheim 12/16mm to Eheim 16/22mm Barb Adapter
12/16mm hose to 16/22mm hose
Eheim 16/22mm to Eheim 25/34mm Barb Adapter
16/22mm hose to 25/34mm hose
Eheim 16/22mm to 5/8 Inch Vinyl Barb Adapter, 45 Degree
16/22mm hose to 5/8 inch vinyl, 45 degree
Eheim 12/16mm to 1/2 Inch Vinyl Barb Adapter, 45 Degree
12/16mm hose to 1/2 inch vinyl, 45 degree
Eheim 16/22mm to 5/8 Inch Vinyl Barb Adapter with Clamp Groove
16/22mm hose to 5/8 inch vinyl, clamp groove
Eheim 12/16mm to 3/4 Inch Vinyl Barb Adapter with Clamp Groove
12/16mm hose to 3/4 inch vinyl, clamp groove
Eheim 12/16mm to 1/2 Inch Vinyl Barb Adapter with Clamp Groove
12/16mm hose to 1/2 inch vinyl, clamp groove
Eheim 12/16mm to 5/8 Inch Vinyl Barb Adapter with Clamp Groove
12/16mm hose to 5/8 inch vinyl, clamp groove
Eheim 16/22mm to 1 Inch Vinyl Barb Adapter, 45 Degree
16/22mm hose to 1 inch vinyl, 45 degree
Eheim 25/34mm to 1 Inch Vinyl Barb Adapter, 45 Degree
25/34mm hose to 1 inch vinyl, 45 degree
Picking the right adapter, answered straight.
My hose feels loose on the filter. Will a new adapter help?
A hose that is too big for its barb will not seal, no matter how hard you push it on. Our adapters cut a barb to your exact hose size, so it seats snug instead of spinning loose. Push each end on by hand until it is fully seated. Use a hose clamp where your setup calls for one. Then check the joint once you fill the tank.
How do I know which adapter size to order?
Pick by your filter model. Our hose guide lists every model's size, and the adapter matches that size. Adapters key on the hose size, not the brand name on the filter.
Do I need glue to install an adapter?
No. Every adapter is a push on fit for the hose or pipe size it lists. You do not need glue.
What if I need a bend instead of a straight run?
Some of our adapters are cut at a 45 degree angle for a gentle bend. For a full 90 degree turn, see our elbow adapters instead.
Can one adapter step down from a bigger hose to a smaller one?
Yes. Many of our adapters connect two different sizes, with one hose or pipe size on each end. Both sizes are listed on the product page.
Which Hose Fits Your Filter: Eheim, Fluval, and JBL Hose Sizes by Model
Eheim, Fluval, and JBL all size their hose differently. Find your model, read its size, and see the adapter that bridges the gap.
Read the guideGet your hose or pipe connected right.
Match your size and order the adapter that fits. Printed to order in the USA.
Need a size we do not stock? Use the custom builder.