Product image of the Black part.
Eheim 16/22mm to 5/8 Inch Vinyl Barb Adapter with Clamp Groove
Works with API / Rena Filstar XP-S / XP-M / XP-L / XP-XL. Also Aqua One Aquis 1000 / 1200. Also Aquael Ultramax 1000 / 1500. Plus 14 more models from 10 other makers, listed below.
This adapter connects 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502) to 5/8 inch clear vinyl tubing. Push each end on by hand for a snug, push-fit connection. Fully seat the hose on the barb. Use an appropriately sized hose clamp where your installation calls for one. One end has a groove cut in for a standard hose clamp, extra hold for a line you cannot check often. We print in PETG. Aquarium keepers have used it submerged for years. Rinse before use.
- For flexible tubing
- One piece design
- Ships in 3 to 5 business days
- $7.95 flat US shipping
- Free 30 day returns
- Made in the USA
Wrong fit? Email us. We reprint it or refund you.
Made in the USA
Printed to order
Custom sized
Compatibility
Works with
Know your connection size?
Pick your connection size and we will tell you whether this is the part. Know your filter model instead? Start there.
Need help identifying your setup? Send us a photo.
Snap the label on your gear and the spot the part goes. A person looks at every photo and emails you back.
Send a photoFill a rack or a fish room? Buy more and pay less per piece.
Need more than 25, or the same order every month? Ask for a bulk price.
Specifications and install steps
Specifications
- Compatible equipment
- API / Rena Filstar XP-S / XP-M / XP-L / XP-XL, Aqua One Aquis 1000 / 1200, Aquael Ultramax 1000 / 1500, Aquatop CF-300 / CF-400, Cobalt Aquatics EXT canister, Dennerle Scaper's Flow, Eheim Classic 600 (2217), Eheim Classic 1500XL (2262), Eheim eXperience 350, Eheim professionel 4+ 250 / 350 / 600, Fzone Stainless steel canisters, JBL CristalProfi e1501, JBL e1502, Marineland Magniflow 160 / 220, Oase BioMaster 250 / 350 / 600 / 850, Penn Plax Cascade 700 / 1000 / 1200 / 1500, SunSun HW-302 / HW-303B / HW-402B / HW-403B
- Ends
- Inlet end, barb, for flexible tubing. Outlet end, barb, for flexible tubing
- Dimensions
- 16mm ID / 22mm OD. 15.88mm ID / 22.23mm OD
- Material
- PETG
- Colors
- Black, White, Olive Green
- Pieces included
- 1 printed piece
- Care
- Pull it off and rinse it in clean water when you clean the rest of your hose line.
How this part connects
This shows what each end is sized for.
| End | Size | Measurement |
|---|---|---|
| inlet | 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502)+ clamp groove (13.7mm) | 16mm ID / 22mm OD |
| outlet | 5/8 inch clear vinyl tubing | 15.88mm ID / 22.23mm OD |
Want us to point at the right row? Send us a photo of your setup and a person will look at it.
Need a different size?
Pick your sizes in the Custom Builder and we will print it.
Build a custom partHow to put this adapter on
- What is in the box
- One printed piece. There is nothing to put together.
- How it goes on
- Look at both ends first. Each end is cut for the size named in the fitment table on this page.
- Push each end on by hand until it seats.
- Fully seat the hose on the barb. Use an appropriately sized hose clamp where your installation calls for one.
- Check it the first time
- Rinse the part in clean water before it goes in your tank.
- After startup, inspect each connection for leaks.
- Cleaning
- Pull it off and rinse it in clean water when you clean the rest of your hose line.
- Taking it off
- Twist it and pull it off by hand. Nothing is glued.
Safety
A note on safety
We print every part in PETG. It is the material aquarium keepers have used submerged for years. Rinse each part in clean water before you add it to your tank.
Common questions
My hose feels loose on the filter. Will a new adapter help?
A hose that is too big for its barb will not seal, no matter how hard you push it on. Our adapters cut a barb to your exact hose size, so it seats snug instead of spinning loose. Push each end on by hand until it is fully seated. Use a hose clamp where your setup calls for one. Then check the joint once you fill the tank.
How do I know which adapter size to order?
Pick by your filter model. Our hose guide lists every model's size, and the adapter matches that size. Adapters key on the hose size, not the brand name on the filter.
Do I need glue to install an adapter?
No. Every adapter is a push on fit for the hose or pipe size it lists. You do not need glue.
What if I need a bend instead of a straight run?
Some of our adapters are cut at a 45 degree angle for a gentle bend. For a full 90 degree turn, see our elbow adapters instead.
More parts for your equipment
Other parts we print for the same gear.
Pairs well with this part
Other parts sized to fit the same hose or pipe.
