Snail Traps
Two piece baited cups with a funnel entry, in a 9mm or 14mm opening. The lid lifts off to bait the trap and to empty it.
Each trap is two printed pieces. The body is an open cup and the lid is a bell with a funnel that hangs down inside it. Put bait in the body, set the lid on, and stand the trap on the substrate. The opening at the bottom of the funnel measures 9mm or 14mm, and it ends deep inside the cup. Three open pockets on the floor take a stainless nut or a clean pebble to hold the trap down. The lid is a cover, not a seal.
Baited Snail Trap, Nano, 9mm Opening, 2 Piece
A two piece baited cup with a friction fit lid and a funnel that narrows to a 9mm opening inside the trap.
Baited Snail Trap, Nano, 14mm Opening, 2 Piece
A two piece baited cup with a friction fit lid and a funnel that narrows to a 14mm opening inside the trap.
Baited Snail Trap, Standard, 9mm Opening, 2 Piece
A two piece baited cup with a friction fit lid and a funnel that narrows to a 9mm opening inside the trap.
Baited Snail Trap, Standard, 14mm Opening, 2 Piece
A two piece baited cup with a friction fit lid and a funnel that narrows to a 14mm opening inside the trap.