Skip to main content

Ships in 3 to 5 business days$7.95 flat US shipping

TankRig

Parts for Fluval Flex 15

The 15 US gallon Flex, the same curved front shape as the Flex 9 with more than twice the pump. Printed PETG parts for it, made to order in the USA.

These are the parts we print for it.

About the Fluval Flex 15

This page lists every part we print for the Fluval Flex 15.

Fluval sells the Flex 15 as item 15006 in black and 15008 in white.

It carries the same curved front and the same rear filter layout as the Flex 9, and a much stronger pump: Fluval lists 132 US gallons per hour against 61 for the Flex 9.

Lighting steps up with it, to 54 LEDs, 48 white and 6 RGB, at 7500K and 2450 lumens. The same Flexpad remote runs it.

The Flex 15 is the larger of the two remote controlled Flex tanks. The Flex 32.5 above it swaps the handheld remote for a Bluetooth light run from a phone.

What Fluval publishes for the Flex 15

Fluval publishes these figures for the Flex 15. They describe the gear itself.

Water capacity
15 US gallons, 57 L
Outside tank size
16 x 15 x 15 in, 41 x 39 x 39 cm
Pump output
132 US gallons per hour, 500 LPH
Power use
10.8W
Filter stages
3, with foam, carbon and BIOMAX media
LEDs
54 total, 48 white and 6 RGB
Brightness
2450 lumens at 7500K

Fluval Media Baskets

1 part.

Guides for this gear

These pages cover this gear by name, or other gear from the same maker.

Other Fluval gear

Run more than one of these? Each page shows the parts we print for that model.

More for your Fluval gear

See every part we print for Fluval gear, and the guides that go with it.

Browse these parts

Need something for the Flex 15 that is not here? Tell us what you run and we will add it to the list we build from.

Brand names on this page belong to their own companies. We use them only to show which gear these parts are made for. TankRig is not part of those companies, and they do not back or approve our parts.