Parts for Fluval Evo 13.5
Fluval's 13.5 US gallon nano saltwater tank, with a reef rated 14000K light. Printed PETG parts for it, made to order in the USA.
These are the parts we print for it.
About the Fluval Evo 13.5
This page lists every part we print for the Fluval Evo 13.5.
Fluval sells the Evo 13.5 as item 10531. It is a saltwater kit, not a freshwater one, and the light is 14000K, which Fluval calls reef capable.
The rear filter compartment is sized around Fluval's own gear. Fluval states it holds an M50W heater and a PS2 Mini protein skimmer, both sold on their own, and that the tank itself takes a CP1 or CP2 circulation pump.
Filtration is three stages, with a foam block, a carbon insert and a BIOMAX insert in the box.
Some shops list the same tank as the Sea Evo XII. It is one tank with two labels.
What Fluval publishes for the Evo 13.5
Fluval publishes these figures for the Evo 13.5. They describe the gear itself.
- Water capacity
- 13.5 US gallons, 52 L
- Outside tank size
- 22 x 15 x 11.5 in, 56 x 38.5 x 29 cm
- Pump output
- 132 US gallons per hour, 500 LPH
- Filter circulation
- 132 US gallons per hour, 500 LPH
- Power use
- 16W
- LEDs
- 31 total at 14000K
- Brightness
- 1383 lumens
Fluval Media Baskets
2 parts.
Guides for this gear
These pages cover this gear by name, or other gear from the same maker.
- Fluval Media Basket Setup: Canister Filter Media Order ExplainedFilter media has an order: mechanical, biological, then chemical. See why it matters and the most common Fluval media basket mistakes.
- Fluval Flex and Fluval Spec Accessories: Media Baskets, Spray Bars, and What Actually Fits TodayFluval Flex and Spec tanks are some of the most modded aquariums out there. See which baskets we make for each one, and what owners mod most.
- Fluval Hose Size Chart: 14.5 mm and 17 mm by Filter SeriesFluval uses two hose sizes across its whole canister range. See which series takes which, with Fluval's own part numbers.
- Which Hose Fits Your Filter: Eheim, Fluval, and JBL Hose Sizes by ModelEheim, Fluval, and JBL all size their hose differently. Find your model, read its size, and see the adapter that bridges the gap.
Other Fluval gear
Run more than one of these? Each page shows the parts we print for that model.
More for your Fluval gear
See every part we print for Fluval gear, and the guides that go with it.
Browse these parts
Need something for the Evo 13.5 that is not here? Tell us what you run and we will add it to the list we build from.
Brand names on this page belong to their own companies. We use them only to show which gear these parts are made for. TankRig is not part of those companies, and they do not back or approve our parts.