Skip to main content

Ships in 3 to 5 business days$7.95 flat US shipping

TankRig

Parts for Fluval Spec III

The 2.6 US gallon Spec, Fluval's smallest desktop tank with a filter in the back chamber. Printed PETG parts for it, made to order in the USA.

These are the parts we print for it.

About the Fluval Spec III

This page lists every part we print for the Fluval Spec III.

Fluval lists the Spec III as the Spec 2.6 US Gal, 10 L. Item 10515 in black and 10517 in white. Both names mean the same tank.

It is the smallest tank in the Spec line. The filter sits in a rear chamber under a lift off cover, so the media comes out without reaching past the fish.

Lighting is 32 LEDs at 7000K inside a waterproof aluminum frame with a touch switch. Fluval rates the LEDs for 50,000 hours.

The pump is rated as a range rather than one figure, 46 to 66 US gallons per hour, because the outflow is adjustable.

What Fluval publishes for the Spec III

Fluval publishes these figures for the Spec III. They describe the gear itself.

Water capacity
2.6 US gallons, 10 L
Outside tank size
10 x 8 x 11.5 in, 25.5 x 20 x 29 cm
Pump output
46 to 66 US gallons per hour, 175 to 250 LPH
Power use
10W
Filter stages
3, with foam, carbon and BIOMAX media
LEDs
32 total at 7000K
Brightness
738 lumens

Fluval Media Baskets

1 part.

Guides for this gear

These pages cover this gear by name, or other gear from the same maker.

Other Fluval gear

Run more than one of these? Each page shows the parts we print for that model.

More for your Fluval gear

See every part we print for Fluval gear, and the guides that go with it.

Browse these parts

Need something for the Spec III that is not here? Tell us what you run and we will add it to the list we build from.

Brand names on this page belong to their own companies. We use them only to show which gear these parts are made for. TankRig is not part of those companies, and they do not back or approve our parts.