Product image of the Black part.
Lily Pipe Outflow Single, Eheim 16/22mm, Replacement
Works with Aqua One Aquis 1000 / 1200. Also Aquael Ultramax 1000 / 1500. Also Dennerle Scaper's Flow. Plus 9 more models from 5 other makers, listed below.
This is a single outflow replacement sized for 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502), the piece to grab if one glass pipe cracked and you do not want to replace the whole pair. It ships as one finished pipe. We print the pipe in pieces and glue the pieces together before it ships. The tip has a flared bell mouth, the classic lily pipe look. PETG is a strong alternative to glass lily pipes. It will not shatter the way glass can. Rinse before use.
- For flexible tubing
Made in the USA
Printed to order
Custom sized
Compatibility
Works with
- Aqua One Aquis 1000 / 1200
- Aquael Ultramax 1000 / 1500
- Dennerle Scaper's Flow
- Eheim Classic 600 (2217)
- Eheim Classic 1500XL (2262)
- Eheim eXperience 350
- Eheim professionel 4+ 250 / 350 / 600
- Fzone Stainless steel canisters
Show 4 more
- JBL CristalProfi e1501
- JBL e1502
- Oase BioMaster 250 / 350 / 600 / 850
- SunSun HW-302 / HW-303B / HW-402B / HW-403B
Know your connection size?
Pick your connection size and we will tell you whether this is the part. Know your filter model instead? Start there.
Need help identifying your setup? Send us a photo.
Snap the label on your gear and the spot the part goes. A person looks at every photo and emails you back.
Send a photoSpecifications and install steps
Specifications
- Compatible equipment
- Aqua One Aquis 1000 / 1200, Aquael Ultramax 1000 / 1500, Dennerle Scaper's Flow, Eheim Classic 600 (2217), Eheim Classic 1500XL (2262), Eheim eXperience 350, Eheim professionel 4+ 250 / 350 / 600, Fzone Stainless steel canisters, JBL CristalProfi e1501, JBL e1502, Oase BioMaster 250 / 350 / 600 / 850, SunSun HW-302 / HW-303B / HW-402B / HW-403B
- End
- Hose end, barb, for flexible tubing
- Dimensions
- 16mm ID / 22mm OD
- Material
- PETG
- Colors
- Black, White, Frost
- Pieces included
- 1 finished part
- Care
- Rinse it in clean water when you clean the rest of your hose line.
How this part connects
This shows what each end is sized for.
| End | Size | Measurement |
|---|---|---|
| hose | 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502) | 16mm ID / 22mm OD |
Want us to point at the right row? Send us a photo of your setup and a person will look at it.
Need a different size?
Pick your sizes in the Custom Builder and we will print it.
Build a custom partHow to put this lily pipe on
- What is in the box
- 1 finished part. We print the pipe in pieces and glue the pieces together before it ships. There is nothing to put together.
- How it goes on
- Push the hose onto the barb by hand until it seats. Use an appropriately sized hose clamp where your installation calls for one.
- Hook the pipe over your tank rim.
- Check it the first time
- Rinse the part in clean water before it goes in your tank.
- After startup, check every hose connection for leaks.
- Cleaning
- Rinse it in clean water when you clean the rest of your hose line.
- Taking it off
- Pull the hose off the barb by hand.
Safety
A note on safety
We print every part in PETG. It is the material aquarium keepers have used submerged for years. Rinse each part in clean water before you add it to your tank.
About this single outflow pipe
This is the outflow pipe only, for 16/22mm hose. It is printed in four pieces and glued together before it ships.
The inflow pipe is sold alone too: see the inflow pipe. Want both? The 16/22mm pair is $36.99, which is $2.99 less than the two sold alone.
Different hose? Lily Pipe Inflow + Outflow Pair, Eheim 12/16mm.
Common questions
What comes in a lily pipe order?
A matched inflow and outflow pair ships as two finished pipes, one inflow and one outflow. A single replacement direction ships as one finished pipe.
Do the lily pipe pieces need glue?
No, we glue the pieces together before it ships.
Can I buy just one direction instead of a matched pair?
Yes. Order a single inflow or outflow as a replacement, which ships as one finished pipe. Most tanks run a matched pair.
What colors do lily pipes come in?
We print lily pipes in black and in a frost finish. Pick the color that matches the rest of your setup.
More parts for your equipment
Other parts we print for the same gear.
Pairs well with this part
Other parts sized to fit the same hose or pipe.
More Lily Pipes
Other sizes and styles in this group. See all Lily Pipes