Eheim 12/16mm to 1/2 Inch PVC Barb Adapter, 45 Degree
This adapter connects 12/16mm hose (Eheim Classic 150/250/350/600, JBL InSet) to 1/2 inch PVC pipe (Schedule 40). The pipe end is a plain spigot that slips into a standard PVC fitting. We do not glue this end, so you can take it apart later. Add PVC cement yourself if you want a permanent joint. It has a 45 degree bend built in, for tight spots where a straight adapter cannot clear a wall, a stand shelf, or a corner behind the tank. See the fitment table below for the exact sizes this part fits. We print in PETG. Aquarium keepers have used it submerged for years. Rinse before use.
Fits flexible tubing
Fits rigid PVC
One piece design
- Pieces
- 1
- Material
- PETG
Made in the USA. Printed in the USA when you order.
Fill a rack or a fish room? Buy more and pay less per piece.
Need more than 25? Ask for a bulk price.
Made in the USA
Printed to order
Custom sized
Pairs well with
Other parts sized to fit the same hose or pipe.
Fitment
| End | Fits | Size |
|---|---|---|
| inlet | 12/16mm hose (Eheim Classic 150/250/350/600, JBL InSet) | 12mm ID / 16mm OD |
| outlet | 1/2 inch PVC pipe (Schedule 40) | 21.34mm OD |
Sizes come from manufacturer specs or verified listings, not guesses. We measure or source every dimension before it ships on a product page.
Safety
A note on safety
We print every part in PETG. It is the material aquarium keepers have used submerged for years. We cannot promise how any part performs in your tank. You know your tank and your animals best, so the call is always yours. Rinse each part in clean water before you add it to your tank.