Fry Saver Box, Standard, 1.5mm Slots, Suction Mount

This is an open top box that holds small fish apart from the rest of the tank. It prints as one piece, so there is nothing to put together. The left wall, the right wall, the front wall, and the floor are all cut with slots, so water moves through the box. The back wall is solid, because it faces the glass. The slots measure 1.5mm. That width is our own choice and we have not tested it against any fish, so look at it yourself and decide whether it suits what you keep. Inside, the box measures 120mm wide, 80mm front to back, and 100mm tall. Two keyholes in the back wall take your own suction cups. Push a cup head through the round part of the hole, then slide the box down so the stem rides up into the narrow slot. No suction cup maker publishes a head or stem size, so we picked one. Measure your cups first. Suction cups are not included. No box is a substitute for watching your tank. We print in PETG. Aquarium keepers have used it submerged for years. Rinse before use.

Slot width is a new choice on our end. Check the fit before you trust it with livestock you care about.

• Made in the USA
• Printed to order
• Custom sized