Real photo of the Black part.
Eheim 16/22mm to 3/4 Inch PVC Barb Adapter
Works with Aqua One Aquis 1000 / 1200. Also Aquael Ultramax 1000 / 1500. Also Dennerle Scaper's Flow. Plus 9 more models from 5 other makers, listed below.
This adapter connects 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502) to 3/4 inch PVC pipe (Schedule 40). The pipe end is a plain spigot that slips into a standard PVC fitting. We ship it dry, with no glue, so you can take it apart later. Push the spigot all the way into the fitting. Add PVC cement yourself if you want a permanent joint. We print in PETG. Aquarium keepers have used it submerged for years. Rinse before use.
For flexible tubing
For rigid PVC
One piece design
- Ships in 3 to 5 business days
- $7.95 flat US shipping
- 30 day refunds, and you keep the part
- Made in the USA
Made in the USA
Printed to order
Custom sized
Compatibility
Works with
- Aqua One Aquis 1000 / 1200
- Aquael Ultramax 1000 / 1500
- Dennerle Scaper's Flow
- Eheim Classic 600 (2217)
- Eheim Classic 1500XL (2262)
- Eheim eXperience 350
- Eheim professionel 4+ 250 / 350 / 600
- Fzone Stainless steel canisters
Show 4 more
- JBL CristalProfi e1501
- JBL e1502
- Oase BioMaster 250 / 350 / 600 / 850
- SunSun HW-302 / HW-303B / HW-402B / HW-403B
Know your connection size?
Pick your connection size and we will tell you whether this is the part. Know your filter model instead? Start there.
Need help identifying your setup? Send us a photo.
Snap the label on your gear and the spot the part goes. A person looks at every photo and emails you back.
Send a photoFill a rack or a fish room? Buy more and pay less per piece.
Need more than 25, or the same order every month? Ask for a bulk price.
Specifications and install steps
Specifications
- Compatible equipment
- Aqua One Aquis 1000 / 1200, Aquael Ultramax 1000 / 1500, Dennerle Scaper's Flow, Eheim Classic 600 (2217), Eheim Classic 1500XL (2262), Eheim eXperience 350, Eheim professionel 4+ 250 / 350 / 600, Fzone Stainless steel canisters, JBL CristalProfi e1501, JBL e1502, Oase BioMaster 250 / 350 / 600 / 850, SunSun HW-302 / HW-303B / HW-402B / HW-403B
- Ends
- Inlet end, barb, for flexible tubing. Outlet end, slip socket, for rigid PVC
- Dimensions
- 16mm ID / 22mm OD. 26.67mm OD
- Material
- PETG
- Colors
- Black, White, Orange
- Pieces included
- 1 printed piece
- Care
- Pull it off and rinse it in clean water when you clean the rest of your hose line.
How this part connects
This shows what each end is sized for.
| End | Size | Measurement |
|---|---|---|
| inlet | 16/22mm hose (Eheim Classic 600/1500XL, JBL e1502) | 16mm ID / 22mm OD |
| outlet | 3/4 inch PVC pipe (Schedule 40) | 26.67mm OD |
Want us to point at the right row? Send us a photo of your setup and a person will look at it.
Need a different size?
Pick your sizes in the Custom Builder and we will print it.
Build a custom partHow to put this adapter on
- What is in the box
- One printed piece. There is nothing to put together.
- How it goes on
- Look at both ends first. Each end is cut for the size named in the fitment table on this page.
- Push each end on by hand until it seats.
- Fully seat the hose on the barb. Use an appropriately sized hose clamp where your installation calls for one.
- Some sizes have a PVC end. That end is a plain spigot that slips into a standard PVC fitting. We ship it dry, with no glue, so you can take it apart later. Add PVC cement yourself if you want a joint that stays.
- Check it the first time
- Rinse the part in clean water before it goes in your tank.
- After startup, inspect each connection for leaks.
- Cleaning
- Pull it off and rinse it in clean water when you clean the rest of your hose line.
- Taking it off
- Twist it and pull it off by hand. Nothing is glued, unless you added PVC cement yourself.
Safety
A note on safety
We print every part in PETG. It is the material aquarium keepers have used submerged for years. Rinse each part in clean water before you add it to your tank.
Common questions
How do I know which adapter size to order?
Pick by your filter model. Our hose guide lists every model's size, and the adapter matches that size. Adapters key on the hose size, not the brand name on the filter.
Do I need glue to install an adapter?
No. Every adapter is a push on fit for the hose or pipe size it lists. You do not need glue.
What if I need a bend instead of a straight run?
Some of our adapters are cut at a 45 degree angle for a gentle bend. For a full 90 degree turn, see our elbow adapters instead.
Can one adapter step down from a bigger hose to a smaller one?
Yes. Many of our adapters connect two different sizes, with one hose or pipe size on each end. Both sizes are listed on the product page.
More parts for your equipment
Other parts we print for the same gear.
Pairs well with this part
Other parts sized to fit the same hose or pipe.
