Real photo of the Black part.
Spray Bar, Eheim 25/34mm Inlet, 200mm
Works with Eheim Classic 1500XL.
This spray bar connects to 25/34mm hose (Eheim Classic 1500XL suction side). It spreads the return water through evenly spaced holes along its 200mm length. Mount it along the back or side of the tank with the two built-in zip tie slots. Hole size and spacing are fixed by the print, so every bar comes out the same. We print in PETG. Aquarium keepers have used it submerged for years. Rinse before use.
For flexible tubing
One piece design
- Ships in 3 to 5 business days
- $7.95 flat US shipping
- 30 day refunds, and you keep the part
- Made in the USA
Made in the USA
Printed to order
Custom sized
Compatibility
Works with
Know your connection size?
Pick your connection size and we will tell you whether this is the part. Know your filter model instead? Start there.
Need help identifying your setup? Send us a photo.
Snap the label on your gear and the spot the part goes. A person looks at every photo and emails you back.
Send a photoFill a rack or a fish room? Buy more and pay less per piece.
Need more than 25, or the same order every month? Ask for a bulk price.
Specifications and install steps
Specifications
- Compatible equipment
- Eheim Classic 1500XL (2262)
- End
- Inlet end, barb, for flexible tubing
- Dimensions
- 25mm ID / 34mm OD
- Material
- PETG
- Colors
- Black, White
- Pieces included
- 1 printed piece
- Care
- Pull it off and rinse the bar and its holes in clean water.
How this part connects
This shows what each end is sized for.
| End | Size | Measurement |
|---|---|---|
| inlet | 25/34mm hose (Eheim Classic 1500XL suction side) | 25mm ID / 34mm OD |
Want us to point at the right row? Send us a photo of your setup and a person will look at it.
Need a different size?
Pick your sizes in the Custom Builder and we will print it.
Build a custom partHow to put this spray bar up
- What is in the box
- One printed piece. There is nothing to put together.
- How it goes on
- One end connects to your hose or pipe. The holes run along the length of the bar.
- Turn the bar so the holes point where you want the water to go.
- Push the end on by hand until it seats. A PVC inlet is a plain spigot that pushes into a standard PVC fitting, shipped dry with no glue.
- Mount it along the back or side of the tank with the two built-in zip tie slots.
- Whether a hose joint holds without a clamp depends on your hose wall, how old the hose is, and how much the joint gets moved. Add a hose clamp for insurance on any joint you cannot check often.
- Check it the first time
- Rinse the part in clean water before it goes in your tank.
- After startup, inspect the connection where the bar meets your hose or pipe for leaks.
- Cleaning
- Pull it off and rinse the bar and its holes in clean water.
- Taking it off
- Cut the zip ties, then twist the bar and pull it off by hand. Nothing is glued.
Safety
A note on safety
We print every part in PETG. It is the material aquarium keepers have used submerged for years. Rinse each part in clean water before you add it to your tank.
Common questions
Do I need to drill my own holes in the spray bar?
No. Hole size and spacing are fixed by the print, so every bar comes out the same. You do not drill or modify it yourself.
Does the spray bar fit PVC pipe or only canister hose?
TankRig spray bars are sized to fit a canister hose or PVC pipe, depending on the size you pick. Match the size to what you already have installed.
Is the spray bar printed in PETG?
Yes. We print spray bars in PETG, made to order in the USA.
Why do you not list a flow rate for your spray bars?
Hole size and spacing are fixed by the print, but real flow depends on your own filter and setup.
More parts for the Eheim Classic 1500XL
Other parts we print for the same gear.
Pairs well with this part
Other parts sized to fit the same hose or pipe.
