ATO Sensor Rim Clip, Universal

The channel is cut for a round sensor body about 17mm across. A C shaped channel runs down the bracket. Push the sensor in through the side mouth and slide it up or down to set the level you want. The channel holds 22mm of the body at any height, with 30mm of travel. The top of the bracket hangs over your tank or sump wall. It opens to a wall up to 12mm thick, and a nylon thumb screw snugs it onto anything thinner. Turn the thumb screw down until the bracket sits firm. Nylon will not scratch glass. The thumb screw is not included. These sensors need a different mount. The AutoAqua Smart ATO Micro, Lite G2, and nano are square. The Innovative Marine HydroFill and HydroFill Ti are flat blocks. The XP Aqua Duetto 2 puts two sensors in one housing. The Red Sea ReefATO+ comes on its own magnet bracket. The Tunze 3152.300 and the CoralVue HYDROS float are not covered either. This is a bracket. It holds a sensor at the height you set. This part rides at the tank or sump wall, up at the water line. We print it in PETG, a tough plastic. Keep it out of direct sun, since sun wears down any plastic over time.

This is a new product.